PRO BREWING IN-LINE OXYGENATION KIT

$299.00
In stock
SKU
BEPS-IN-LINE-O2

$299.00

Our Pro Brewing In-Line Oxygenation kit is designed to oxygenate your wort while transferring from your heat exchanger to your fermentor. It also gives an easy to read temperature without the need to lay on the ground to read your thermometer. *Note: Chiller in photos not included.

The Blichmann Pro Brewing In-Line Oxygenation kit is designed to oxygenate your wort while transferring from your heat exchanger to your fermentor. It also gives an easy to read temperature without the need to lay on the ground to read your thermometer.

Oxygenation of wort is essential to proper yeast growth and overall health. Healthy yeast has the largest impact over final beer flavor than about any other variable. Achieving 8-10 ppm (part per million) of dissolved oxygen (DO) in your wort prior to fermentation is vital to achieve your best tasting beer. Too little and yeast growth is stunted, off flavors can be created, lag times increase, and final gravity may not be reached. Too much and you can end up with excessive fusel alcohols in your finished beer. Knowing the FLOW is important - other regulators simply regulate pressure and depending on your downstream restriction the actual flow can vary widely!

Quantity Part
6 1.5" Sanitary Clamp
6 1.5" Sanitary Gasket
1 1.5" Sanitary Elbow
1 Sanitary Thermometer
1 1.5" Sanitary Tee
1 1.5" Sanitary Sight Glass
1 1.5" Sanitary 15" Tee
10' Oxygenation Hose with 1/4" Flare Nut
1 Oxygen Flow Regulator
1 1.5" Tri Clamp Carbonation Stone
1 1/4" Male x Male SS Fitting
1 1/4" NPT Ball Valve
1 1/4" Flare Adapter