Therminator with 12oz bottle
Rear view showing mounting bracket
Shown with QuickConnector fittings
Back-flush Assembly on Therminator
Therminator Optional Accessories
Therminator with ThruMometer
Cooling water fittings are Garden Hose Thread (GHT) so no need to buy adapters! Wort side fittings are 1/2" male NPT - easy to adapt to your preferred hose fitting or our line of QuickConnector stainless swivel fittings. Easier to sanitize and clean than a female threaded fitting.
Heavy gauge stainless mounting bracket connects up, down, back, and forward, so it easily mounts to your brewing system.
Super easy to use (no tools) and easy to sanitize - the QuickConnector line of stainless swivel fittings are a great accessory for the Therminator wort chiller
Optional back-flush hose accessory is used to flush the wort side of the chiller after use. This hose assembly is an 18" length of 1/2" ID braided vinyl hose with a garden hose thread on one end, and a QuickConnector on the other. Both fittings are factory assembled to the hose with Oetiker clamps.
Optional back-flush assembly shown connected to a hot tap water faucet for cleaning after use.
Optional accessories available through your Retailer, includes 2 QuickConnector fittings (for 3/8" or 1/2" ID hose) and a back-flush hose assembly
Therminator shown with the ThruMometer in-line thermometer from Blichmann Engineering. Used to set the wort outlet temperature exactly to desired yeast start temp.
