Tri-clamp Fittings For Fermenator^TM Conicals:

By popular request we have developed a tri-clamp (sanitary) fittings for our full line of Fermenator^TM conicals.  This new design maintains all the operational features of our standard fittings, but adds that sleek professional look to your brewery.  This completely weldless design includes a 1” bottom dump assembly complete with elbow, ball valve, barb fitting, cover plate, and all clamps and gaskets.  The racking arm is a ½” tri-clamp design, and also includes the barb fitting, cover and all clamps and gaskets.  In addition, we are offering an OPTIONAL tri-clamp blow-off assembly that fits into the #7 stopper hole on the lid.  The blow-off assembly is actually compatible with ALL Fermenator^TM conicals we’ve ever built!  It includes an elbow, 1” barbed fitting, and a ½” barbed fitting for CO₂ pressurization of the unit for pumping the finished beer.  

Note that our competitor does not include the barbed fitting or a cover plate which will be needed for operation.  Ours are included at a very competitive price.  They also do not offer a tri-clamp blow-off assembly. 

Unfortunately, units already sold cannot be retrofitted with the tri-clamp bottom dump and racking fittings since different size holes in the tank are required for the tri-clamp bulkhead fittings. 

42 gal Fermenator^TM Conical - ferment in full bbl batches!!

This incredible new design leverages our extremely reliable lid sealing system to create a 15 gal           MODULAR attachment to our popular 27 gal Fermenator conical....total gross capacity is 42 gal - perfect for a 1bbl batch size (31 gal)!!  We've invested in special tooling to manufacture this weld-free extension and offer it at a competitive price!

Already own an F3 model 27 gal  Fermenator conical?  An upgrade extension kit is available and is fully compatible!  (may require drilling two 1/4" holes on earlier F3-27 models).  Having the option to change "lids" means you can brew 20 gal and 31 gal batches with the same unit.  Kit includes leg braces, 15gal extension, blow-off hose assembly with hose P-clips.  You will reuse the clamp, seal, lid hatch etc. from your F3-27 conical.

Also available as a complete 42 gal unit if you don't need the smaller capacity - the 27 gal lid is not included, so the cost is a bit lower.  Includes everything as above except the 27 gal lid.

Blow-off bucket shown in photo is for demonstration purposes and is not included. Shown with optional leg extensions.

Fermenator^TM Casters

     By popular request we now offer casters for our full line of Fermenator^TM conicals!

*Not compatible with leg extensions since the unit would be too top heavy to safely move. Although the casters will bolt onto the extension legs, the additional length of leg extending below the caster bracket will interfere with the rotation of the caster swivel rendering the casters inoperable. Do not defeat this important safety feature by sawing the additional length off of the extension leg!

We are now offering an adjustable face version of our popular BrewMometer^TM.  This unit features a special dial-face connection that can be rotated to ANY convenient viewing angle (up/down/left/right and anywhere in-between!).  No more stooping over or standing on a steel to read the dial of the thermometer!  Offered in ½” NPT and our weldless version too!