20 gal BoilerMaker brew pot with standard equipment
Glass Level Gauge with Stainless Guard & Clean-outs
Includes clean-out brush for sight glass!
Button Louver False Bottom
Interior View of BoilerMaker Brew Pot
Shown it the 20 gal BoilerMaker brew pot showing all standard equipment:
*Stainless 3pc ball valve with dip tube
*Adjustable angle BrewMometer
*Glass level gauge with stainless guard & laser etched graduations
*Handles
*Lid
*Stepped bottom for optional false bottom
Standard dip tube allows you to drain within 3/8" of bottom of pot for less lost wort! Unique snap-in design means you can remove/install without tools!
Our borosilicate heavy wall GLASS level gauge will never yellow or cloud. Cleaning is quick and easy since we provide clean-out ports on the top and bottom and include a brush for cleaning! The heavy gauge stainless guard is laser etched with volume graduations for accurate readings...no more guessing!
Cleaning the sight glass couldn't be easier - included with your BoilerMaker is a brush to make cleaning the inside of the level gauge tube a snap! Removable screws are located on each end of the gauge to insert the cleaning brush.
Our custom made pots feature a stepped bottom. Our optional patent pending button louver false bottom sits on this ledge for a tight seal. During lauter, the weight of the grains pushes it against the ledge making an impervious seal virtually eliminating sidewall shunting and the resultant loss of efficiency! All this AND an incredibly low foundation water!
Our patent pending button louver false bottom is a hybrid of a perforated false bottom (high efficiency) and a slotted manifold (plug resistance) to give you the best of BOTH designs! Not recommended for boil kettles - use our optional boil kettle screen & shield.
Our optional boil screen snaps quickly into the standard dip-tube. It hugs the sidewall and features a stainless steel shield to keep hops and hot break from clogging the filter. As with any filter, high loads of pellet hops can sometimes plug the filter. We recommend a vigorous whirlpool at the end of the boil, letting it sit for 15-20 min and draining slowly to prevent disturbing the sediment. If this is not successful, we recommend bagging your hops in a reuseable nylon mesh bag.
Not recommended for mashing. Use our optional button louver false bottom instead.
True to all Blichmann designs - we've thought of all the details - including a place to rest the lid! In addition, we've oriented the handles so when you carry the pot the valve and thermometer don't get in your way.
This interior view shows the optional button louver false bottom. Note that the thermometer and dip tube do not protrude excessively into the pot to stay out of the way of the stir paddle.
We also include a 6" X 10" X 24ga stainless plate to shield the valve, BrewMometer, and level gauge from the heat of high BTU burners. Depending on the design of your burner, you may need to fabricate a bracket to hold it in place (brackets are not included with the shield)
